5
WALL MOUNTING
- Pull the cylindrical bracket
B
out of the central opening and
insert it into the front or rear opening.
- Tighten the four Allen screws slightly (torque: 6 Nm) so that
the cylindrical bracket
B
is fixed to its new position.
Please note that the horizontal rotation angle decreases when the
cylindrical bracket
B
is in the rear position.
→ Attach the wall mount to the selected vertical surface. This
surface must be able to support the weight of the speaker system
and all the fastening elements used. When calculating the total
weight, also consider possible leverage effects.
→ When selecting the fastening elements (eg bolts etc, not included
in the parts contents), make sure that they are permanently
anchored to the selected vertical surface and can carry the
calculated total weight.
→ Use all four mounting holes to attach the wall mounting.
→ Attach mounting accessories from ADAM Audio that are intended
for use with the wall mount, (see illustration), on your speaker
system. Observe all assembly and safety instructions.
→ Do not move the monitor to the desired angle of inclination until
it is fully connected to the ADAM Audio mounting hardware and
firmly attached to the wall mount.
→ Tighten all supplied bolts and nuts with a torque of 20 Nm.
