EN
10 - WARRANTY
The warranty provided by the manufacturer Adam Pumps Spa covers the product for 2 years from the date of production.
Adam Pumps Spa (manufacturer) provides its customers with:
a warranty that covers problems resulting from production and conformity defects in the purchased products
the warranty period starts from the date indicated on the CE label which indicates the date of manufacture. A label indicating the date of manu-
facture will be applied to those products which are not provided with a CE label. Therefore, the warranty period will start from that date;
the warranty will become immediately null and void should the data of manufacture be illegible, for any reason, unless Adam Pumps Spa is
responsible for this;
the warranty covers repairs or replacement of the product, in the event it cannot be repaired
repair operations can be carried out only by Adam Pumps or by Adam Pumps’ authorised centres;
the warranty will not be valid in the event the product is tampered with by unauthorised persons, bodies, and/or companies;
any warranty request is subject to approval by Adam Pumps. The goods can be returned only if provided with an authorisation code. Upon
request, Adam Pumps will provide this code which will invoke the warranty for the product to be repaired or replaced
unless otherwise agreed with Adam Pumps, the returned goods must be sent via transport pre-paid by who has invoked the warranty to Adam
Pumps Spa;
goods returned without authorisation and/or with transport not paid can be rejected;
The warranty will not be applied in the following cases
Failure to use or install the product according to Adam Pumps’ instructions
The product has been used with unauthorised fluids.
The product has been modified or tampered with
The product is used in an area with power supply defects (voltage changes, current phase shift, etc.)
The product is used without the supplied suction filter (inside or outside the pump).
Immediately excluded from the warranty are: adhesive labels, plastic and metal casing, keyboards and masks, components subject to wear
such as blades, impellers, graphite brushes (where present in the motors), seals and gaskets in general.
11 - TECHNICAL SUPPORT
The Manufacturer is always available for any information required on installation, operation or maintenance of the machine.
The Customer should ask the questions clearly, with reference made to this Manual and to the instructions listed.
PARTS TO BE DISPOSED OF
DISPOSAL METHOD
PACKAGING
The packaging consists of biodegradable cardboard which can be sent to companies for
normal pulp recycling.
METAL PARTS
The metal parts, whether painted or stainless steel, are usually recycled by companies special-
ised in the scrap metal industry.
ELECTRICAL AND ELEC-
TRONIC COMPONENTS
These must be disposed of by companies specialised in disposing of electronic components,
in compliance with the requirements of Directive 2002/96/EC (see Directive text below).
PARTS OF A DIFFERENT
NATURE
Other parts of the system in which the electric pump is installed, such as pipes, rubber gaskets,
plastic parts and wiring, are to be given to companies specialised in disposing of industrial
waste.
APPLICABLE REGULATIONS
FOR CUSTOMERS IN THE
EUROPEAN UNION
The European Directive 2002/96/EC states that the equipment bearing this symbol on the
product and/or on the packaging is not to be disposed of with unsorted municipal waste. The
symbol indicates that this product must not be disposed of with normal household waste. It
is the responsibility of the owner to dispose of these products and the other electrical and
electronic equipment through specific collection facilities appointed by the government or by
local authorities.
