© Adam Equipment Company 2008
22
8.3 SETTING THE SCALE TO USE DEFAULT PARAMETERS
The scale can be set to clear the memory and use default parameters if necessary. This
should only be required if the processor is changed or a major problem happens.
To set the default values place a jumper at location JTAG 9-10.
Hold the
[Tare]
key down and turn on the scale. The display will show “DEFAL”. If you
want to set the defaults press the
[Tare]
key, If not turn the scale off.
8.4 TESTING WITH X10 FUNCTION
During normal operation press and hold the
[Tare]
key and the scale will change to show
the weight only with increased resolution. All other normal functions of the scale except
tare and zero will be disabled. Pressing the
[Tare]
key again for more than 3 seconds will
bring the display back to the normal resolution.
