© Adam Equipment Company 2008
11
F2
100g
Enable price per 100g or per kg option
F5
Point
Unit Price/Price decimal point
F6
init
ZEro
Initial Zero Range
F7
rE
ZEro
Re-Zero range
F8
SCSivE
tArE
Successive Tare Enable
F9
Ad
Count
Display the A/D counts
F10
round
Rounding off the Total Price
F11
ZEro
Select the zero mode
F12
Lvd
mod
Low voltage detection
F13
CAL
batt
Set calibration of battery voltage measurements
F14
ACLr
Not used, Auto Clear is always enabled
F15
CAL Cnt
Enable or disable the calibration counters
Other parameters must be changed using the service parameters as
described in section 8.2
After calibration or changing of any parameters the value of the counters is
required to be visible on the scale marked in a permanent manner. Adam
Equipment supplies a label for this purpose, to be placed near the verification
marks on the side of the scale.
Any time these values change the scale is required to be retested by the
appropriate authorities in the users location.
