Adam Equipment HCB 2202, Manual

Page: 7 / 129

EN
© Adam Equipment Company 2018
7
3.4 LOCATING AND PROTECTING YOUR BALANCE
In order to keep your balance functioning at its best we suggest that you do the
following:
Avoid extremes of temperature. Do not place in direct sunlight or near air
conditioning vents.
Make sure the balance is located on a strong table and free from vibration.
Avoid unstable power sources. Do not use near large users of electricity such
as welding equipment or large motors. Do not let the balance battery go flat –
if you are not using it for a long time you should charge the battery up
periodically to make sure the battery does not lose its charge. When you turn
off the scale by pressing [ON/OFF] key, the power is not completely isolated.
You should disconnect the power supply if it is not going to be used for an
extended period.
Keep free from vibration. Do not place near heavy or vibrating machinery.
Avoid high humidity that might cause condensation. Keep away from direct
contact with water. Do not spray or immerse the balance in water.
Protection Grade: IPX0
Do not place near open windows, air‐conditioning vents or fans that may cause
a draft and unstable readings.
Keep the balance clean. Do not stack material on the balance / balance pan
when it is not in use. The Highland has a stacking feature for stacking more
than one unit on top of each other which does not apply weight to the pan.
For more details on this see the section on storing.
Avoid operating in high static areas, or weighing high static materials, such as
plastics or powders, as this may damage electronics and affect measurements.
Use grounding mats or bonding straps to reduce potential