8.5 SELECTION OF BPS
•
Press
the
[Unit]
key to scroll to the fifth function “
b xxxx
” to select the
BPS or baud rate per second which is the speed of sending data to
RS-232 interface. DEFAULT SET:
b 9600
•
There are three options “
b 2400
”, “
b 9600
” and “
b 4800
”
•
Use
the
[Tare/Zero]
key to scroll through the options.
•
Press
the
[Unit]
key to confirm the selection and move to the next
function for setting the parity for sending data to RS-232 interface.
8.6 SELECTION OF BIT RATE AND PARITY
•
Press
the
[Unit]
key to scroll to the sixth function “
Par x
” to select the
bit rate and parity used for sending data to RS-232 interface. “
PAr x
”
appears on the screen (
x
can be 1, 2 or 3). DEFAULT SET:
PAr 1
•
The user can select-
PAr 1
- 8 bits no parity
PAr 2
- 7 bits even parity
PAr 3
- 7 bits odd parity
•
Use
the
[Tare/Zero]
key to scroll through the options.
•
Press
the
[Unit]
key to confirm the selection and move to the next
function for setting the transmission mode for sending the data to
RS-232 interface.
15
© Adam Equipment Company 2006
Summary of Contents for CPWplus 15
Page 2: ...Adam Equipment Company 2006...
