Chk bp
Checkweighing
beeper
settings
In
Out
Off
In
Unit
Enable or disable weighing
units, will not allow to
disable all units, at least one
has to be enabled. Parts
counting
can
be
enabled/disabled
Kg
Grams
lb
oz
lb:oz
N (Newtons)
PCS
Kg
Auto-Z
Auto zero settings
0.5
1
1.5
2
2.5
3
0.5
Filter
Filter setting to slow, normal
or fast
Slower
Slowest
Faster
Fastest
Then: 1-6
Faster
Rs 1
Brings up the 1
st
RS232
menu.
Includes
PC,
command and print settings
PC
Cmd
Print
Rs 2
Brings up RS232 menu 2
PC
Cmd
S-id
Set Scale ID
To be entered manually 000000
U-id
Set User ID
To be entered manually 000000
rechar
Indicates time to recharge
-
-
7.2
RS-232
PARAMETERS
This group of parameters can be set by the user for setting the RS-232 active or not, baud
rate, printing mode, accumulation mode, RS-232 language, and user or scale ID numbers.
Pressing the
[Func/Set]
key and holding for 2 seconds
during normal
operation
allows the user to access the parameters.
Scroll through the list of functions using the
⭡
and
⭣
directional keys. Press
[Tare/
↵
]
to enter the
‘rs 1’
or
‘rs 2’
parameters when appearing on the
display.
‘Rs 1’
will provide access to ‘
Print’
,
‘PC’
and ‘
Cmd’
settings.
‘Rs 2’
includes
‘
PC’
and ‘
Cmd’
only. Press
[Tare/
↵
]
to confirm.
When entering a mode, the user will be required to go through each step of
the process by entering the desired values or selecting from the options listed
in the table below and pressing the
[Tare/
↵
]
key to confirm.
Press
[
0
/Esc]
to exit the scale parameter section and return to normal
weighing.
