@Adam Equipment Company 2005
11
•
Under the balance you will find a cover with two screws on it.
•
Remove the cover by unscrewing the two screws, you will find a post
for installing the underhook.
•
Fasten the underhook to the weighing mechanism.
•
Hang a wire through the hole
•
Place the balance on a table with a hole in it or on a stand specially
designed for under-hook weighing, and let the wire hang through the
hole.
•
Suspend a suitable container on the other end of the wire or attach
the sample directly to the wire.
•
If necessary recalibrate the balance with underhook and wire in
place.
•
Now you can operate with below pan weighing.
6.0 CARE
AND
MAINTENANCE
CAUTION
•
Do not use a sharp object (such as a pencil) to touch the keys.
•
Do not let objects fall onto the pan- this may damage the weighing
system.
•
Don't place a weight beyond the range of the balance on the pan.
•
Don't dissemble the balance without permission.
•
Do not expose your balance to extreme moisture or dust over long
periods.
•
It is better to cover your balance after use.
Summary of Contents for ADK 10
Page 2: ...Adam Equipment Company 2005...
