Page 53
The Cinema Reference provides you with the ability to turn its front
panel infrared receiver on and off via software. If you are using the
Cinema Reference in an environment which is flooded by other in-
frared signals (from high intensity light bulbs, high frequency lamps,
IR motion detectors, sunlight, etc.), you may opt to turn the Cinema
Reference’s front panel infrared receiver off. You may also want to
turn this IR receiver off if you are controlling the Cinema Reference
from a computer controlled touch screen or ADA keypad as, in some
instances, this IR receiver will prevent component control due to
data reflection.
The Cinema Reference’s “Out Of The Box” setup has the IR re-
ceiver in the On position. To turn the IR receiver off or on:
1
While in the Pro Setup Mode, turn the MODE knob clock-
wise until the display reads IRR CONTROL and then press
the MODE knob. The Cinema Reference’s display will
read IRR CONTROL on the top line and the second line
will read “IS NOW ON” or “IS NOW OFF”.
2
Turn the MODE knob until the display reads the correct set-
ting for the IR Receiver, ON or OFF.
3
To exit the IRR Control Setup Mode without leaving the Pro
Setup Mode, press the MODE knob. If you wish to exit
the Setup Mode completely, turn any of the knobs other
than MODE or INPUT.
Pro Setup - IR Receiver On & Off Control
The Cinema Reference
permits you to turn off the
front panel IR receiver via
software. This is useful if the
Cinema Reference is being
touch screen controlled as
some installations will cause
the front panel IR to reflect
data transfers and prevent
control.
