Page 24
1
1
2
2
3
4
3
5
6
4
7
8
5
1
2
6
REC
OSD
MAIN
REC
1
7
8
REC
2
3
4
L
R
LS
RS
SUB
C
L
R
L
R
L
R
L
R
OUT
AUDIO OUTPUTS
AUDIO INPUTS
VIDEO INPUTS
VIDEO OUT
S-VIDEO OUT
1
2
3
4
DIGITAL AUDIO INPUTS
S-VIDEO INPUTS
LOW VOLTAGE
AC INPUT
115V-60Hz/230V-50Hz
AC OUTPUT
10A Max Switched
ADA Bus™
1 2 3 4
DATA PORT
Serial Data
12VDC OUT
100mA Max Per
DC 1
1- 2+
DC 2
1- 2+
HDTV/RGB
COMPONENT
VIDEO
SWITCHER
Use With DVD
Players or
Digital Video
Tape Players
1
2
OUT
Y
Cr
Cb
LASER DISC PLAYER
Dolby Digital (AC-3)
RF Switcher & AC-3
RF Demodulator
1
2
Connections!
In order to play an AC-3 Laser
Disc, you must connect the Digital
AC-3 Output to a Digital Audio
Input (RCA Type Coax) below.
DC Input Mute Switch
OFF
ON
CAUTION: Disconnect Supply Cord Before Servicing.
ATTENTION: Debrancher Avant Le Depannage.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION!
RISQUE DE CHOC ELECTRIQUE.
NE PAS OUVRIR
MADE IN U.S.A.
WARNING! Risk Of Hazardous Energy!
Make Proper Connections.
AVERTISSEMENT! Energie Electrique Dangereuse!
Faire Des Connexions Propres Pour L'Hautparleur.
Voir La Notice De Fonctionnement.
Use Same
Value Fuse
115V-1AS.B.
230V-.5AS.B.
Voltage
Selector &
Safety Fuse
On This Side
115 V
115V
230V
15
Manufactured under license from Dolby Laboratories Licensing Corp.
"Dolby", "Dolby Digital", "Pro Logic", & the Double-D Symbol are the trademarks of Dolby Laboratories Licensing Corp.
Manufactured under license from DTS Technology, LLC. DTS Digital Surround is a trademark of DTS Technology LLC.
Manufactured under license from Lucasfilm Ltd. U.S. patent numbers 5,043,970; 5,189,703; and 5,222,059.
Foreign patents pending. Lucasfilm and THX are registered trademarks of Lucasfilm Ltd.,
Cinema Reference
1
2
3
OPTICAL INPUTS
In order to play an AC-3 Laser Disc,
you must connect the Digital AC-3
Output to a Digital Audio Input.
DVD Player
PCM/AC-3
Digital Out
Video
Out
S-Video
Out
Component Video Output
Cb Cr Y
Optional S-Video Cable
(Only functional if you connect
your TV or Projector to the
Cinema Reference's "Main"
S-Video Output.)
Component Video
(You must connect these
three cables to a TV, line-
doubler, or projector that
is capable of processing
component video)
Video
Cable
Digital Output
(This cable carries Dolby Digital (AC-3) 6 channel audio from
DVDs and standard 2 channel digital audio from CDs.)
3
3
1Y
1Cr
1Cb
3
Changing the Cinema Reference’s Audio Input for a DVD with only an Optical Output
If you are using a DVD player which only has an optical digital audio output, you will need to use an
optical TOS-Link type cable to connect the laser disc to Optical #2 on the Cinema Reference. Then
follow these steps.
1
Turn the Input knob to DVD PLAYER 3 and press the knob.
2
Turn the Mode knob clockwise to SETUP MODE and press the knob.
3
Turn the Mode knob to AUDIO INPUT and press the knob. Once the knob is pressed the
display will read “DIGITAL IN 3”.
4
Turn the mode knob until the display reads either OPTICAL IN 3 and press the knob.
You have now altered the DVD PLAYER 3 input to access Optical Input 3.
Connection 3
Connection 4
Connection 2
Connection 1
