ADA INSTRUMENTS Shooter400, Operating Manual

Page: 9 / 34

MEASUREMENT FOUNDATION
SH OO TER 400
5.3 How to operate the Laser Range Finder
The Laser Range and Speed Finder Monocular has two modes, they are «Range Mode» (default) and «Speed
Mode». Shortly press the «Mode» button and they can be shifted one another. When «Range Mode» is
chosen,”Range”character will appear on the top of the LCD. Shortly press the « » button and the distance
data will be displayed on the bottom of the LCD immediately.
If holding pressed the « » button, Scan measurement of distance starts. The new measured data will be
displayed on the bottom of the LCD ceaseless. After release the « » button, Scan will stop and the LCD will
return initiative state.
The laser indicator « » will blink when laser is transmitting.
In measuring the distance , If the reflection of target is too weak,The LCD will display «- - - -». If the measure
-
ment of distance succeed, « Quality > > > > > > » will appear on the bottom of the LCD. The more numbers of
« > », meaning stronger reflection.
Six grades in all are set for the quality of reflection. In measuring the distance, the LCD will display as follows
Figure 4.: