8
2. Level the fryer using the regulated legs.
Pic. 3. . Electrical diagram of the ADA SCE 12 electric pressure fryer
R1, R2 – heater 2,9 kW; W1 – main switch; T1 – temperature regulator; T2 – thermal fuse; K1 – control
lamp
Warning!
Incorrect use of the appliance can cause oil to burn and fry, which can cause severe
burns, injury, as well as fires and equipment damage.
3. Before connecting the appliance to the electrical system, check the information on the
type plate.
4. Before connecting the appliance to the electric installation, it is mandatory to connect a
protective conductor with yellow-green insulation and a cross-section of not less than 2.5 mm
to the housing. The protective terminal is located on the back of the device and is marked with
the symbol
5. The appliance should be connected to the network, and a protective switch in
accordance with standards should be installed. The ground wire must not be connected
to this switch. The electric cable should be positioned so that it does not reach a
temperature 50°C higher than its surroundings at any point.
6. After connecting the AC power cord with the socket, check the correctness of
individual phases.
