17
• Never immerse the device in water or other liquids.
• Do not allow the electrical device connected to the mains to be spilled with liquids or
water jets. It may cause electric shock!
• Do not move or tilt the device during operation.
• Do not hit the knobs and heaters,
• Handle hot fat with particular care.
• When operating the device, remember that the temperature of the device's
components may be high. Particular care should be taken because the top of the
appliance reaches a high temperature, which may result in burns.
• The fryer must not be put into operation after it has been found to be operating
incorrectly.
• Each time after finishing work disconnect the device from the mains.
• Have the technical inspection of the fryer carried out at least once a year. Including
checking the power cords including plug and socket, connection contacts, and grounding
check. This inspection should be carried out at the manufacturer's website or in an
establishment with appropriate qualifications and equipment with the required control
equipment.
4.7. First aid
When providing first aid you should:
- call the appropriate medical services,
- facilitate breathing by removing clothing,
- If necessary, take the injured person into the fresh air,
- cover the injured person with a blanket and prevent them from falling asleep,
- constantly monitor the victim,
- in case the injured person loses consciousness and is not breathing, give artificial
respiration until the arrival of the doctor.
4.8. Warnings
The use of the device for purposes different from or deviating from its normal purpose is
prohibited and considered as improper use.
Any claims against the manufacturer or / and its proxies for damages resulting from the
use of the device contrary to its intended use are excluded.
Liability for damages caused during the use of the device in a manner inconsistent with
its intended use is borne solely by the user.
1. Connection of the fryer to the electrical installation may only be carried out by a
person with appropriate professional preparation (qualifications). The manufacturer is
not responsible for incorrect connection of the device to the installation.
