ADA GASTROGAZ ADA SCE 12 Operating Manual Download Page 18

18 

 

2. Under no circumstances should you close the lid while the oil is heating. Never heat 
oil alone! 
3. Do not fill the chamber with oil until the chamber is thoroughly drained and before 
checking that the drain valve has not retained water. Always remember to place an oil 
container under the drain valve. If the valve is not closed, the oil will fall out into the 
tank. 
4. The fryer must not be put into operation after the electric system has been 
punctured. 
5. Remember to wash the inside of the safety valve weight housing and their threaded 
ends daily after finishing frying. 
6. Observe the safety rules and basic health and safety regulations. 
7. When operating the device, remember that the temperature of the device's 
components may be high. Particular care should be taken because the top of the 
appliance reaches a high temperature, which may result in burns. 
 
The manufacturer disclaims any liability for any damage that may be caused to persons 
or objects as a result of failure to comply with the obligations imposed by safety 
regulations and regulations regarding the installation of equipment.

 

 
 
 

 

This device is marked in accordance with the European Directive 2012/19 / EU and the Polish Act of 11 
September 2015. "On used electronic and electronic equipment" (Journal of Laws of 23.10.2015 item 
11688) with a crossed out waste container . Such marking informs that this equipment, after the period 
of its use, may not be placed together with other household waste. The user is obliged to give it to the 
collectors  of  used  electrical  and  electronic  equipment.  Collectors,  including  local  collection  points, 
shops  and  communal  units,  create  an  appropriate  system  enabling  the  delivery  of  this  equipment. 
Proper  handling  of  used  electronic  and  electrical  equipment  contributes  to  avoiding  consequences 
harmful to human health and the environment, resulting from the presence of hazardous components 
and improper storage and processing of such equipment. 
At the end of the life of the equipment, return the device to the appropriate institution that deals with 
the disposal of the devices. On behalf of the manufacturer, the contract regarding the organization and 
provision  of  collection,  processing,  followed  by  recovery  and  recycling  and  disposal  of  "Waste 
Equipment" shall be completed by: 
Elektro-EKO 
Electrical and Electronic Equipment Recovery Organization S.A. 
ul. Łopuszańska95, Warsaw 
ENVIRONMENTAL  PROTECTION:  Both  the  packaging  of  the  new  device  and  the  old,  used  devices 
contain valuable secondary raw materials and materials for recycling. Please dispose of individual parts 
by  type  of  material.  Please  inform  your  dealer  or  local  administration  about  the  current  disposal 
method. 

Summary of Contents for ADA SCE 12





















Reviews: