5
A1007841-664Y7800 • A
USING THE CONTROL PANEL
1 -
ON/OFF switch
- to start and stop the appli-
ance.
2 -
Power level switches
- The control panel is
comprised of two switches that allow the user
to select the power of the appliance. When
only the first switch is pushed in, the power of
the boiler is limited to the first stage, i.e. about
half the total power. For operation at full pow-
er, both switches must be pushed in.
3 -
Location for optional internal clock or con-
troller
- Refer to the manual provided with the
accessory.
4 -
Indicator light
- The lamp turns on when the
safety thermostat is activated or when the wa-
ter pressure in the boiler is too low.
5 -
Manual reset high limit thermostat
- If the
boiler temperature exceeds 103°C, the safe-
ty device is activated and the indicator light
is turned on. Refer to
"Resetting the High Limit
Safety Thermostat" on page 25
for the cor-
rect reset procedure.
6 -
Combined temperature and pressure gauge
- Allows the direct reading of both tempera-
ture and pressure of the boiler primary circuit.
7 -
Control thermostat -
Allows to define the tem-
perature setpoint for the primary circuit. Each
number around the dial corresponds to a spe-
cific temperature :
1 = 15°C 2 = 30°C 3 = 45°C 4 = 60°C 5 = 80°C
7
6
4
3
5
1
2
EN
User’s Guide
Summary of Contents for E-Tech W 09 Mono
