ACV E-Tech W 09 Mono, Installation Operation & Maintenance

Page: 12 / 64

12
A1007841-664Y7800 • A
TOOLS REQUIRED FOR THE INSTALLATION
SAFETY INSTRUCTIONS FOR THE INSTALLATION
General remarks
• The connections (electrical, hydraulic) must be
carried out in accordance with current applicable
standards and regulations.
Essential recommendations for the correct
operation of the appliance
• The boiler must be installed in a dry and protected
area, with an ambient temperature comprised
bewtween 0°C and 45°C.
• Install the appliance to ensure easy access at all
times.
• Make sure to install a pressure reducing valve set
at 4.5 bar if the mains supply pressure is in excess
of 6 bar.
Essential recommendations for safety
• Install the boiler on a base made of non-
combustible materials.
• Do not use or store any flammable, explosive or
corrosive products, such as paint, solvents, salts,
chloride products and other detergent products
near the appliance
• This appliance is not constructed for installation
in zone 3.
Essential recommendations for the electrical
safety
• Only an approved installer is authorized to carry
out the electrical connections.
• The appliance must be connected to the earth.
• Install a 2-way switch and a fuse or circuit breaker
of the recommended rating outside the appliance,
so as to be able to shut power down when
servicing the appliance or before performing any
operation on it.
• Isolate the external electrical supply of the
appliance before performing any operation on the
electrical circuit.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless supervised or unless they
have been given instruction concerning the use
of the appliance by a person responsible for their
safety.
EN
Installation