ACV E-Tech W 09 Mono, Installation Operation & Maintenance

Page: 13 / 64

13
A1007841-664Y7800 • A
PACKAGE CONTENTS
The E-Tech W boilers are delivered assembled and
packaged.
At product reception and after removal of
packaging, check the package contents and
that the appliance is free of damages.
• One E-Tech W boiler
• Installation, Operation and Maintenance Instruc-
tions
• A wall mounting kit
HANDLING INSTRUCTIONS
• The weight of this boiler is 36Kg, which could
present a risk of injury. Ask for help to lift it or
handle it, or use an appropriate lifting means.
• Bring the appliance as close as possible to
the installation location before removing the
packaging.
REMOVING THE BOILER FROM THE
PACKAGING
Before lifting the boiler from the packaging,
ensure that the installation area is clear
and that there are no obstacles making the
installation difficult or unsafe.
1. Open the box and remove the cardboard pack-
aging.
2. Remove the protection pieces and discard in ac-
cordance with applicable local regulations.
3. With help from another person, lift the boiler from
the packaging holding the lipped front edges of
the side panels.
Do not lift or carry the boiler using the
automatic air vent installed at the top and
the pump at the bottom.
BOILER INSTALLATION ON THE WALL
• The boiler must be mounted on a non
flammable support.
• Make sure to level the bracket at installation.
1. Observing the distances below, drill 2 holes of
14mm x 100mm.
2. Using the provided hardware, attach the bracket
to the wall, making sure the bracket is level.
3. Hang the boiler on the bracket.
101,6 mm
101,6 mm
48,4 mm
48,4 mm
EN
Installation