44
Acute Technology Inc.
Copyright
2018
In Figure 2, the BNC-MCX cable is connected to the TravelLogic Trig-In and the trigger
output interface (Trig-Out) of the oscilloscope. After completing the above actions, press the
"Stack Oscilloscope" button, as shown below:
Select the DSO
Select the brand that needs to be stacked on the oscilloscope. When there is no DSO
hardware available for stacking, emulation is the mode used to read back the storage files of
DSO stack.
Connection Type
It can be used to select USB, TCP / IP, according to the connection interface provided by the
oscilloscope brands.
Connect IP
It can be used to select
TCP / IP for the connection mode and enter IP address. When the
Ethernet crossover cable is used, it is recommended that the IP settings of the two machines
be 192.168.1.2 and 192.168.1.3 respectively. Gateway is the same, set to 192.168.1.1, and
