Acute Communication Services Pvt. Ltd.
➢
Once the ignition wire is detected take the green color wire coming from the
ACUTE140 device and connect it to the ignition wire. Turn on the ignition and ensure
that ignition is connected properly.
10.4
Panic button installation
➢
The panic button has to connect to the DIN2 of the device, so when the panic button
is pressed the emergency alert is triggered. Below are the connections for the panic
button installation.
➢
During installation the red colour wire of panic will go for power and black will go for
Digital output of the device.
➢
The green colour of the panic will be connected to the digital input of the device
(Purple colour) and the yellow colour wire will be connected to the ground. If the
number of panic buttons are more than one then the yellow colour will be connected
to the green colour of the next panic button.
➢
The panic button has to connect before turning on the device.
