Acute Communication Services Pvt. Ltd.
1.
Check whether the device is in sleep mode. If yes, turn on the ignition.
2.
Check if the vehicle is parked in a covered area and move the vehicle to an open area
3.
Check the location of device installation in the vehicle and follow instructions in this manual to
correct it
4.
Check if there is any metal above the device and if yes, change the location of the vehicle
where there is no metal surrounding the device.
5.
Check if any metal or item kept on the device and clear the same.
If Processor LED is OFF:
1. Contact Acute Communication Customer Care
9
Device installation Precautions
It is highly recommended that installation of ACUTE140 device and its accessories must be done by a
trained technician only.
Handle the device with care and do not place any heavyweights on the device. There is a Li-ion battery
inside.
It is recommended that the ACUTE140 device not be installed in the places prone to water and rain.
Remove ACUTE140 device during servicing to avoid accidental water splash and high voltages.
