Acustica IVORY5, Manual

Page: 9 / 57

Controls
Output:
This knob controls plug-in input and output gain.
PRE-IN button enables (lamp ON) or bypasses (lamp OFF) the preamp stage of Ivory Eq.
BYPASS button
bypasses the plug-in (lamp ON)
Input Trim: This knob sets the input level from -24dB to +24dB, and is used to control the
signal level inside the eq, the output level is then automatically compensated by the same
amount of gain.
At the first execution of the plug-in, set the input to ensure that you feed an appropriate level
from the first stage of your signal path to the final one.
Input-Output VU meter:
It measures the input (topmost position meter) and output (lowest
position meter) levels of the plug-in.
Each band is controlled independently by an identical set of controls; sections are Low Fre-
quency 1, Low Frequency 2, High Frequency 1 and High Frequency 2, each section has
controls for Q, frequency, cut/boost.
Parametric Bands/Q:
Available values for the Q are:
shelf, 4, 6, 9, 14 and 20 (although these vary depending on gain and bandwidth selection)
Frequencies:
Here the list of available frequencies for each band:
- Low Frequency 1 (Hz): 19, 22, 26, 31, 37, 43, 51, 60, 71, 84, 98, 114, 134, 158, 185,
218, 258, 305, 364, 435, 540;
- Low Frequency 2 (Hz): 21, 24, 29, 34, 41, 48, 57, 67, 79, 92, 108, 126, 148, 173, 203,
240, 280, 332, 400, 477, 572;
- High Frequency 1 (Hz): 617, 727, 862, 1k, 1k2, 1k4, 1k7, 2k0, 2k4, 2k8, 3k3, 3k9, 4k6,
5k4, 6k4, 7k6, 9k0, 11k, 13k, 17k, 24k;
- High Frequency 2 (Hz): 665, 787, 937, 1k1, 1k3, 1k5, 1k8, 2k2, 2k6, 3k0, 3k6, 4k2, 5k0,
5k9, 7k0, 8k2, 9k7, 12k, 14k, 19k, 27k;
Cut/Boost (dB):
Cut/boost values range from -8dB to 8dB.
8