8
9
Using the Thermometer
High & Low Records
Today’s high and low records are displayed for indoor and outdoor
temperature and humidity. Today’s records automatically clear at 12:00am
midnight every day. View today’s high or low records by pressing the “ “ or
“ “ buttons. Press and release again to view current readings.
To manually clear all of today’s LOW recorded values, press and release the
“ “ button to view low records, then press and HOLD the “ “ button for
2 seconds. Dashes will display to confirm you have cleared the LOW records.
To manually clear all of today’s HIGH recorded values, press and release the
“ “ button to view high records, then press and HOLD the “ “ button for
2 seconds. Dashes will display to confirm you have cleared the HIGH records.
Moon Phase
Track the phases of the moon, conveyed through simple lunar phase icons:
OPERATION
Troubleshooting
No outdoor sensor
reception
no bars
If the wireless signal indicator shows no bars:
• Relocate the display and/or the outdoor sensor. The
units must be within 330 ft (100 m) of each other.
• Make sure both units are placed at least 3 feet
(.9 m) away from electronics that may interfere with
the wireless communication (such as TVs, microwaves,
computers, etc).
• Use standard alkaline batteries (or lithium batteries in
sensor when temperature is below -4ºF/-20ºC). Do not
use heavy duty or rechargeable batteries. NOTE: It
may take up to a few minutes for display and sensor
to synchronize after batteries are replaced.
Display screen
not working
• Check that the batteries are installed correctly.
Batteries may need to be replaced.
Outdoor
temperature
is flashing or
showing dashes
Flashing of the outdoor temperature is generally an
indication of wireless interference.
1. Bring both the sensor and display indoors and
remove at least one battery from each.
2. Make sure the A-B-C switch on both units match.
3. Reinstall the batteries in the outdoor sensor.
4. Reinstall the batteries in the display.
5. Let the units sit within a couple feet of each other
for a few minutes to gain a strong connection.
Inaccurate
temperature
or humidity
• Make sure both the display and sensor are placed out
of direct sunlight and away from any heat sources or
vents (see page 7).
• Make sure both units are positioned away from
moisture sources (see page 7).
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or email
[email protected] for assistance.
