![background image](http://html.mh-extra.com/html/biocare/1265/1265_owners-manual_2753382001.webp)
Owner’s Manual
Model : 1265
BIOCARE NO TOUCH THERMOMETER :
Thank you for purchasing the BioCare No Touch Forehead Thermome-
ter. Please read this instruction manual first so you can use this
thermometer safely and correctly. Please keep this instruction manual
for future reference. This innovative medical device uses advanced
infrared (IR) technology to measure temperature instantly and
accurately on the forehead or object.
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE USE
The following basic safety precautions should always be taken.
1. Close supervision is necessary when the thermometer is used by, on,
or near children , handicapped persons or invalids.
2. Use the thermometer only for the intended use described in this
manual.
3. Do not use the thermometer if it is not working properly, or if it has
suffered any damage.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
BEFORE YOU BEGIN
Cautions and Warnings
• As with any thermometer, proper technique is crucial to obtaining
accurate temperaturereadings. Please read this manual thoroughly
and carefully before using.
• Always operate the thermometer in an operating temperature range
16°C to 40°C (60.8°F to 104°F ) , and relative humidity less than 95%.
• Always store the thermometer in a cool and dry place -20°C to 50°C
(-4°F to 122°F) and relative humidity less than 95%.
• Avoid direct sunlight.
• Avoid dropping the thermometer, if it happens and you think the
thermometer may be damaged ,please contact customer services
immediately.
• Do not touch the lens.
• Do not disassemble the thermometer.
• Basic safety precautions should always be observed, especially when
the thermometer is used on or near children and disabled persons.
• This thermometer is not intended to substitute for a consultation with
your physician.
• This thermometer and the subject must remain in a stable environ
ment for at least 30 minutes before measuring the temperature.
• When the measured temperature falls within the fever temperature
range of ≥37.5°C (99.5°F) and <43°C (109.4°F), as indicated by the red
LED on display, please consult with your physician immediately.
Restrictions of Use
This thermometer is clinically proven to produce accurate temperature
measurements. However,please be advised that the accuracy cannot be
ensured when the thermometer is not clean.Check that the probe is
clean before taking ameasurement.
Intended Use
BioCare No Touch Thermometer is intended for the intermittent
measurement and monitoring of human body temperature from
forehead measurement at home. A control measurement using a
conventional thermometer is recommended in the following cases:
1. If the reading is surprisingly low,
2. For new-born infants up to 100 days old,
3. For children under three years of age who have a weakened immune
system or who react unusually in the presence or absence of fever.
How does it work
The thermometer measures the infrared heat generated by the surface
of the skin over the vessel and its surrounding tissue. The thermometer
then converts it into a temperature value .
NOTE : The thermometer does not emit any infrared signal.
Highlighted Features
●
Non-contact measurement that does not require probe cover, there
by saving cost of replacement.
●
Automatically power off if left idle for 30 seconds.
●
Memory function allows you to recall previous results up to 20
previous results.
●
Easy to read LCD with white backlight in a dark environment.
●
Color visible indication of alarm (red) and measurement in progress
(blue).
●
Button-free power on and auto-sense measurement within 3 cm.
Package Content
Meter Overview
Display
Display Mode
Two modes can be selected.
1. Body Mode
This mode is used to measure the forehead
temperature. It also provides clock.
2. Object Mode
This mode is used to measure the object
temperature. It also provides clock.
Setting the Thermometer
You will need to set time for first-time use or after
replacing the batteries.
1. Entering the setting mode
Start with the meter off, press Set Button for
3 seconds to enter the setting mode.
2. Set the date and time
Press Mode Button to select the correct year.
Press Set Button to confirm and move on the
next step.
Press Mode Button to select the correct
month/day/hour/minute.
Setting is all completed. Press Set Button to
exit the setting mode.
Select the Temperature Unit
This meter provides two measurement units used for indicating the
body/object temperature, oC or oF, for your preferred selection.
1. Press Start button to turn on the
thermometer first.
2. Press C/F button to select.
PERFOEM THE TEST
Using the Device
As a Boby Measurement Thermometer
1. Press Start button to trun on the
thermometer first.
2. Press the button to select Body mode.
The temperature unit flashes.
3. Move the probe close to the forehead.
Make sure the probe is flat and close to the
forehead, not at an angle. Perform a forehead
measurement with a distance within 3cm.
The meter will take measurement automatically
when the blue blinks.
4. Read the result.
The measurement result will be done in 3
seconds.
The reading is shown together with green LED
and three short beeps.
NOTE :
•
As the forehead measurement temperature is likely to be affected
by sweat, oil and the surroundings, the reading shall be taken as a
reference only.
•
If the probe is placed at an angle close to the forehead measure
ment, the reading will be affected by surrounding temperature.
Babies’ skin reacts very quickly to the ambient temperature.
Therefore, do not take their temperature with the thermometer
during or after breastfeeding, because the skin temperature may
then be lower than the internal body temperature.
•
If the reading is
<
32°C (89.6°F), the display will show together with
red LED and three short beeps.
•
If the reading is ≥37.5°C (99.5°F) and
< 43°C (109.4°F), the display
will show together with red LED and ten short beeps.
•
The thermometer will automatically turn off if left idle for 30
seconds.
As an Object Measurement Thermometer
1. Press Start button to turn on the
thermometer first.
2. Press the Mode button to select
Object mode. The temperature unit flashes.
3. Move the probe close to the object.
Make sure the probe is flat and close to the
object, not at an angle. Perform an object
measurement with a distance within 3 cm.
The meter will take measurement automatically
with the blue LED blinks.
Owner’s Manual
Owner’s Manual
Owner’s Manual
Owner’s Manual
Owner’s Manual
Thermometer
User’s Manual
Soft Pouch
(Optional)
1.5V AAA
batteries
Auto-sense Probe
1
Start, Set (C/F) Button
5
3-color LED
2
Battery Cover
6
Display Screen
3
Memory Button
4
1
2
3
6
4
5
Object temperature indicator
1
Body temperature indicator
2
Memory mode
3
8
1
2
3
7
6
4
5
4
Temperature unit
5
Low battery indicator
6
Time
7
Date
8
Temperature reading
Non-Contact Infrared
Thermometer