Page
6
of
15
Vehicle Interior
6.
Remove the Interior Protective Coverings
There are several protective coverings on the interior trim pieces and some areas of the carpet. Also, there is a
protective cover on the interface dial and two paper tags on each of the front head restraints (one at the front and one at
the rear).
Carefully remove all items with clean hands to avoid soiling any surfaces. If any of the interior is dirty, clean it with mild
soap or an Acura cleaning product such as Leather & Vinyl Cleaner (P/N 08700-9214A) or Carpet Spot Remover (P/N
08700-9215A). Clean real wood surfaces with a mild detergent and a soft, damp cloth. Be sure to wipe off any excess
liquid to avoid damaging the wood. Do not use other cleaning agents like household detergents on this wood. These
products could damage it.
7.
Install the Floor Mats
Install the floor mats where they belong. Be sure to place the driver's floor mat eyelets over the anchors in the floor and
turn the knobs
clockwise
to the lock position. Place the rear floor mat into position; it does not have an anchor.
