Service Bulletin
19-044
July 31, 2019
Version 1
2020 RLX Sport Hybrid: TQI and New Model Service Information
AFFECTED VEHICLES
Year
Model
Trim
2020
RLX Sport Hybrid
With Advance Package
INTRODUCTION
This bulletin covers the total quality inspection (TQI) of the 2020 RLX Sport Hybrid. It includes these procedures:
1. Remove the Exterior Protective Coatings
2. Install the Fuses
3. Remove the Interior Protective Coverings
4. Install the Left-Side Shift by Wire (SBW) Shifter Trim
5. Install the Floor Mats
6. Check the 12-Volt Battery
7. Set the Tire Pressures
8. Initialize the TPMS
9. Install the Body Plugs
10. Install the Front License Plate Holder
11. Clean the Rear License Plate Area, and Install the Mounting Hardware
12. Check the Tire Repair Kit
13. Fuel the Vehicle
14. Do the PCM Idle Learn Procedure
15. Charge the High-Voltage Battery
16. Check the Remote Start Operation
17. Check/Refresh the SiriusXM
Radio Dealer Demo Service (Except Alaska and Hawaii)
18. Check the Safety and Driver Assistance Indicators
19. Check the Head-Up Display (HUD)
20. Check the Voice System Interaction
21. Check Bluetooth
22. Check the Moonroof One-Touch Feature
To do a TQI on a trim level with the navigation system, be sure to complete S/B 19-045,
2020 RLX Sport Hybrid
:
TQI of
the Navigation System.
This bulletin also includes this new model service information:
1. Rearview Camera Activation Time
CLIENT INFORMATION:
The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment, and
training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and you should not assume
this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an
authorized Acura automobile dealer.
©
2019 American Honda Motor Co., Inc. — All Rights Reserved
Page
1
of
15
