
538
uu
Jump Starting
u
Han
d
lin
g the U
n
expected
5.
Connect the other end of the second
jumper cable to the engine hanger as
shown. Do not connect this jumper cable to
any other part.
6.
If your vehicle is connected to another
vehicle, start the assisting vehicle’s engine
and increase its rpm slightly.
7.
Attempt to start your vehicle’s engine. If it
turns over slowly, check that the jumper
cables have good metal-to-metal contact.
Once your vehicle’s engine has started, remove the jumper cables in the following
order.
1.
Disconnect the jumper cable from your vehicle’s ground.
2.
Disconnect the other end of the jumper cable from the booster battery
-
terminal.
3.
Disconnect the jumper cable from your vehicle’s battery
+
terminal.
4.
Disconnect the other end of the jumper cable from the booster battery
+
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
■
What to Do After the Engine Starts
17 ACURA MDX-31TZ56300.book 538 ページ 2016年10月25日 火曜日 午後2時27分
Summary of Contents for MDX2017
Page 227: ...226 17 ACURA MDX 31TZ56300 book 226...
Page 347: ...346 17 ACURA MDX 31TZ56300 book 346...
Page 461: ...460 17 ACURA MDX 31TZ56300 book 460...
Page 513: ...512 17 ACURA MDX 31TZ56300 book 512...