Acura 2012 TL Owner'S Manual Download Page 591

Page: 591 / 650

Store the center cap in the trunk.
Make sure it does not get
scratched or damaged.

Store the jack and tools in the tool
kit case. Place the tool kit case in
the flat tire.

To remove the spacer cone,
squeeze the tabs on the wing bolt
to disengage it from the center of
the spacer cone, then pull the bolt
downward.

To install the wing bolt to the
spacer cone, reverse this
procedure.

Secure the flat tire by screwing
the wing bolt back into its hole.

Place the flat tire face down in the
spare tire well.

Remove the spacer cone from the
wing bolt, turn it over, and put it
back on the bolt.

Lower the trunk floor, then close
the trunk lid.

Your vehicle’s original tire has a
tire pressure monitoring system
sensor. To replace a tire, refer to

(see

page

17.

18.

19.

20.

21.

22.

518

Changing a Flat Tire

Changing a Tire with TPMS

ing
Ca
re

of
th

ne
x

587

SPACER CONE

TAB

SPACER CONE

For compact
spare tire

For normal
tire

WING BOLT

Loose items can fly around the
interior in a crash and could
seriously injure the occupants.

Store the wheel, jack, and tools
securely before driving.

11/01/14 19:36:50 31TK4630_592

2012 TL

Summary of Contents for 2012 TL











































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 TL

Reviews:

Related manuals for 2012 TL

Brands by name

Popular brands

Acura 2012 TL, Owner'S Manual

Search results

Summary of Contents for 2012 TL

Reviews:

Related manuals for 2012 TL

Brands by name

Popular brands