▲ ▼
Keyless Lock Acknowledgment
When you press the LOCK button
on the remote transmitter or the
keyless access remote, some
exterior lights flash, and a beeper
sounds when you push the LOCK
button again within 5 seconds to
verify that the doors and the trunk
are locked and the security system
has set (see page
). You can
customize the exterior lights not to
flash and the beeper not to sound.
When you press the UNLOCK
button on the remote transmitter or
the keyless access remote to unlock
the driver’s door/all the doors
(depending on the customize
setting), the exterior lights blink
twice to verify that the door(s) is
unlocked and the security system is
turned off.
To turn this feature on or off, follow
these instructions.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘KEY
AND REMOTE UNLOCK MODE’’
and repeat the procedure again.
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
You can choose this item to
customize from ‘‘DOOR SETUP’’ by
pressing the INFO (
/
) button
repeatedly.
395
CONTINUED
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
131
11/01/14 18:16:22 31TK4630_136
2012 TL
Summary of Contents for 2012 TL
