28
AR100 Operation Manual
If the selected parameters correspond to the parameters of the sensor
interface, the program will identify the sensor, read and display its
configuration parameters:
If connection a connection cannot
be established, a prompt will
appear asking to make an
automatic search for the sensor.
To start search, press the
Yes
button and a
configuration window will appear Where: it will
be necessary to set the search range for the
baud rate and the network addresses. When set,
press the
Search
button.
The program will perform automatic search of
the sensor by searching over possible rates,
network addresses and COM-ports of PC.
9.3
Sensor Operation
Once the sensor is successfully identified, check its operability by placing
a target in the path of the laser and within the sensor’s working range.
Press the
Request
button to obtain a single measurement on the
Current
Result
indicator at the top of the screen.
Note: The pressing of the
Request
button executes 06h request
