Acucraft circular 4, Operator'S Manual

Page: 33 / 46

33
SUPPLEMENTAL MATERIAL
33
Chimney Fan
CARE AND CLEANING
The Chimney Fan System is designed for prolonged
use. The fan should be inspected at least once a year
when the chimney is inspected. Fuel residues and
other deposits should be removed from the fan blades
and the bottom of the motor housing.
The top of the fan is hinged and can be opened in
order to ease the cleaning.
Start-Up and Configuration
SYSTEM TESTING
Before any adjustments are made to the system,
follow these procedures:
1. Turn the chimney fan ON and make sure that it is
operating. Increase and decrease the speed of the
fan by adjusting the fan speed control to make sure it
is operating properly.
2. Turn the fan OFF and make sure the pressure
switch opens, so the power to the circuit, it controls,
is disconnected.
Maintenance
PRIOR TO CLEANING
Remove butterfly nut or screw from each hinge prior
to cleaning.
Check other heating appliances (water heater,
furnace, fireplace etc.) for proper operation while
the chimney fan is operating. Make sure no flue
gases are spilling out as this can lead to carbon
monoxide poisoning.
Do not open the motor housing unless power to
the chimney fan has been disconnected.
WARNING
WARNING
DRAFT