eWON4001™
Installation Guide
ver 2.1
page 20 of 31
13 ) You can now access the different Web pages of the eWON and, among others, configure your
connection parameters by selecting the following options in the menu of the home page:
To configure the Ethernet IP address:
<Configuration>, <System Setup>, <Communication>, <Ethernet>
To configure the PPP IP address:
<Configuration>, <System Setup>, <Communication>, <DialUp (PPP)>
6.2.2 Under Windows XP
1 ) With Windows XP, you first have to go to
Start
and select
Connect to
and then
Show all
connections
.
Create a new connection
appears in the network tasks box (top left corner).
2 ) Selecting
Create a new connection
menu opens the new connection creation wizard. Click
Next
.
3 ) Select the 2
nd
option (out of 4) –
Connect to the network at my workplace
and then click
Next
.
4 ) Select the 1
st
option (out of 2) –
Dial-up connection
and click
Next
.
5 ) Give a
name
to this connection and click
Next
.
6 ) Introduce the
phone number
of the eWON and click
Next
.
7 ) Click
Finish
.
8 ) The connection windows opens and introduce the PPP authentication parameters that are the same
than those used to access to the eWON embedded Web site (<
adm
> / <
adm
> by default).
9 ) The new connection has now been added in the “Connections” directory and also under
Start
and
Connect to
as well as on your desktop if you selected the relevant option (
Create icon on desktop
).
10 ) You can now make a connection either by using the currently open window, or later on by using one
of the available paths (
Start
menu or desktop icon).
11 ) Wait until the modems are synchronized and that your PPP authentication has been accepted.
12 ) Launch your Internet navigator.
13 ) Introduce the IP address of the eWON in the address field of the navigator (the default address is
202.0.0.240
in dial-up mode (see chapter
IP parameters configuration on page 21
14 ) The eWON should then display its login Web page. If not (
-404 Error, server not found-
), redo the
procedure from the beginning and check whether you did not forget anything.
15 ) Unless you have changed them, introduce the default web site access login parameters that are:
• User Name: <adm>
• Password: <adm>
16 ) You can now access the different Web pages of the eWON and, among others, configure your
connection parameters by selecting the following options in the menu of the home page:
To configure the Ethernet IP address:
<Configuration>, <System Setup>, <Communication>, <Ethernet>
To configure the PPP IP address:
<Configuration>, <System Setup>, <Communication>, <DialUp (PPP)>
