manualshive.com logo in svg

ACT'L eWON4001, Installation Manual, Page: 2 / 34

Share
Download
ACT'L eWON4001 Installation Manual Download Page 2

eWON4001™

Ethernet Gateway

Remote Access Server (RAS)

Programmable Industrial Router (PIR)

1 Product description ........................................................1

1.1 Introduction ................................................................... 1

1.2 General specification of the hardware platform ................... 1

1.3 Functions of the eWON4001™ Ethernet Gateway................. 1

1.4 Functions of the eWON4001™ RAS Modem RAS & PIR.......... 1

1.5 Datalogger..................................................................... 2

1.6 Typical applications ......................................................... 2

1.7 Part Numbers and internal options .................................... 2

1.8 External accessories........................................................ 3

2 Structure of the eWON technical documentation ................4

3 Housing and markings....................................................5

3.1 Housing Interfaces .......................................................... 5

3.2 Markings ....................................................................... 6

3.3 Equipment information and versions.................................. 7

3.4 Mechanical outline .......................................................... 9

3.5 Mounting and environmental conditions ............................10

3.6 Preparing the installation ................................................10

3.7 Specification for external power supply selection ................10

4 Front panel control LEDs .............................................. 11

5 Communication interfaces and I/Os ............................... 11

5.1 Ethernet Port ................................................................11

5.2 Embedded PSTN Modem .................................................12

5.3 Embedded GSM/GPRS Modem .........................................12

5.4 Embedded ISDN Modem .................................................13

5.5 Resets..........................................................................14

Table of Contents

Summary of Contents for eWON4001



































Reviews:

No comments