Active Vision SX-5100, User Manual

Page: 45 / 105

DVR User Manual
40
Fig 4-36 P.T.Z Configuration-Advanced Fig 4-37 Advanced-Preset
Step 3: In the preset setting tab, while clicking Setting button, a dialog will pop-up as Fig 4-38:

User can control the dome by rotating up, down, left, right and adjust
the rotating speed zoom, focus and iris of the dome;

Select the serial number of the preset point. Click button to
enable the PTZ wiper and click button to enable the PTZ light.
Fig 4-38 Preset Setting
Note : PTZ must support wiper and light function and these two buttons are just available when selecting PELCOP or PELCOD.

Click Save button to save the settings, click icon to hide the tool
bar, right click to view the toolbar again; click icon to exit the current
interface.

In the preset interface, click OK button to save the setting; click Exit
button to exit the current interface.
Step4: In the Advanced tab, while clicking cruise “Setting” button, a dialog
box will pop-up as Fig 4-39:
Fig 4-39 Cruise Setting

Click Add button to add cruise line in the list box (max 8 cruise line can be added); select a cruise line and click Setup button to see a
dialog box as Fig 4-40: