Active Vision SX-5100, User Manual

Page: 23 / 105

DVR User Manual
17
Fig 4-2(a) main menu Fig 4-2(b) System Setup
4.1 Basic Configuration
Basic configuration includes three sub menus: system, date & time and DST.
4.1.1 System
Step1: Enter into Menu

Setup

Basic

System. Refer to Fig 4-3:
Step2: In this tab you can setup the device name, device ID, video format, max network user, VGA resolution and language. The
definitions for every parameters display as below:
Device Name: The name of the device as it may display on the client end or on CMS, this would help the user to recognize the device
remotely.
Device ID: This ID is used to map the DVR with IR remote controller and speed dome cameras.
Video Format: Two modes: PAL and NTSC. User can select the video format according to the cameras being used.
Password Check: If enabled the user would need to input the user name and the password for performing corresponding operations.