Active Vision SX-5100, User Manual

Page: 30 / 105

DVR User Manual
25
4.3.4 Stamp
Stamp
：
This provides an option to enable or disable the Camera Name and the
Time stamp on the video. You can also choose a position for the stamp on the
screen
.
Step1: Enter into Menu

Setup

Record

Stamp tab. Refer to Fig 4-12:
Step2: Checkmark camera name and time stamp; click Setting button. User can
use cursor to drag the camera name and time stamp at random positions. Refer to
below Figures:
Step3: Select “All” to setup all channels with the same parameters.
Fig 4-12 Record Configuration-Stamp
Before Drag After Drag
4.3.5 Recycle Record
This option is used to recycle the HDD space once it is full. If enabled, the system will automatically delete the old records (FIFO,
recycling space) and recycle the space if it is completely utilized. The setting steps are as follows:
Step1: Enter into Menu

Setup

Record

Recycle Record tab.
Step2: Checkmark the „recycle record‟ box to activate the auto recycling.
Step3: Click “Apply” button to save the setting; click “Exit” button to exit the current interface.
Note : If the option is disabled or not selected, the DVR would stop recording once the HDD is full.