``
24
Clock setup
When changing to clock mode with the MODE button, press it for 7
seconds and you will enter the Setup mode of the clock.
Adjusting
the
clock
:
Use the left
Setup
button and the right
Mode
button as follows:
Every push on
Mode
changes the time unit and the selected unit
flashes.
During the flashing, every push on
Setup
increases 1 unit.
Stage Display
Flashing
1
HH:mm
mm
2
HH:mm
HH
3
DD.MM or MM.DD
DD
4
DD.MM or MM.DD
MM
5
20YY
YY
6
Saving the updated time and date
6.3 DRIVING AND GENERAL USE
Climbing an
obstacle
To climb an Obstacle, drive the
AFISCOOTER S
forward toward the
obstacle until the front wheel touches
the obstacle, then, maintaining your
direction, increase speed.
Driving on
slopes and
turns
Before making sharp turns, particularly on
inclines, reduce speed to minimum,
to prevent side roll-over.
AFISCOOTER S
is able to go up slopes
steeper than the recommended safe
slope. Do not drive on inclines where you
are not sure about the slope degree.
However drive very slowly and avoid side
angles higher than 26% (15°).
Prior to use
After reading through this entire manual and before using
AFISCOOTER S
,
do a visual check of all the parts of the vehicle, to make sure that there is
no visible damage. If you have any questions or concerns, contact your
dealer.
Controller
programming
Several parameters of
AFISCOOTER S
controller can be programmed.
Programming must be done by trained authorized technician only.
Incorrect programming can cause abnormal operation of
AFISCOOTER S
and may result in damage and personal injury.
Summary of Contents for Afiscooter S
Page 1: ...Afiscooter SE User Manual Afiscooter S P N PRS4001...
Page 29: ...29 Figure 11 Figure 12...
Page 33: ...P N PRS4001...