``
20
CHAPTER 5
– ADJUSTMENT INSTRUCTIONS
(Numbers refer to Figures 4 and 5)
Adjusting the tiller
angle (1.7)
Adjust the angle of the tiller as follows:
Release the tiller adjustment lever (1.10), by pushing it
down.
Release the lever at the desired place.
Adjusting the
handlebar height
Handlebar height can be adjusted about 40mm by a technician.
Seating in the
AFISCOOTER S
Before attempting to drive
AFISCOOTER S
, make sure the plug
is disconnected from the charging socket (1.12).
Note: While the plug is in the charging socket,
AFISCOOTER S
cannot be operated.
Use the seat rotation lever (7.5) to rotate the seat sideways, and
raise the armrest (7.3) to give you easy access to the seat.
Use the seat forward/reverse lever (7.4) to adjust the location of
the seat.
Handlebars and hand
protectors
When driving always keep your hands on the handlebars (1.7)
and within the hand protectors (1.6).
Adjusting the shock
absorbers to the user
It is possible to adjust the rear shock absorber to the required
load, or way of using AFISCOOTER S. If necessary, ask a
technician to adjust the absorbers for your needs.
Figure 4 Figure 5
Summary of Contents for Afiscooter S
Page 1: ...Afiscooter SE User Manual Afiscooter S P N PRS4001...
Page 29: ...29 Figure 11 Figure 12...
Page 33: ...P N PRS4001...