- 30 -
Network >> Wireless Setting
The camera supports WLAN while you use the wireless network. Select
the Enable option to enable this feature.
-
Network ID (SSID}: Keep the default setting of this option to
connect the camera to any access point under the infrastructure
network mode. To connect the camera to a specified access point,
set a SSID for the camera to correspond with the access point’s
ESS-ID. To connect the camera to an
Ad-Hoc wireless workgroup, set the same wireless channel and
SSID to match with the computer’s configuration.
Click Site Survey to display the available wireless networks, so that
you can easily connect to one of the listed wireless networks.
List of searching results
-
Wireless Mode: Select the type of wireless communication for the
camera: Infrastructure or Ad-Hoc.
-
Channel: Select the appropriate channel from the list.
-
Authentication: Select the authentication method to secure the
camera from being used by unauthorized user: Open, Shared-key,
WPA-PSK, and WPA2-PSK. The following table explains the four
options:
