Activ8rlives Peak Flow meter, User Manual

Page: 30 / 52

30
Uploading data from your Activ8rlives Peak
Flow meter and auto set-up of device.
1. With the Service Link open on your computer’s desktop, connect the Basestation of your
Peak Flow meter to your PC with the black USB cable supplied. Your computer may display
a message indicating that it is looking for drivers which it will automatically install.
Be patient if your computer is old and a bit slow. On older PCs, this may require a second
attempt.
Once the drivers have been installed, the Service Link software will programme your Peak
Flow meter with your predicted PEF and FEV
1
.
This all takes place in seconds.
Your Peak Flow meter will record 240 values for both PEF and FEV
1
, but we recommend
uploading your data at regular intervals throughout the week to prevent loss of data due to
damage of your
Peak Flow meter or in case you lose it.