Introduction
Power Port
Th
e Power port is used to connect the Receiver’s Power cord.
USB Port
Th
e USB port is used for so
ft
ware upgrades via a USB
fl
ash drive or
for USB over network application (UoIP). Refer to Section 4.2.
Updating the Receiver’s Firmware Only for more information.
Reset Button
Th
e Reset button is used to reset the receiver to default settings. Press
and hold the Reset button with a pin to reset the Receiver.
ScreenBeam USB Transmitter
Th
e USB Transmitter has a single USB connection, used to connect it to a
USB port on a Windows 7/8/8.1 computer that is not running Miracast or
Intel WiDi. To use ScreenBeam in this manner, you must install the
ScreenBeam Wireless Display so
ft
ware on the computer (see chapter 2,
Connecting to a Receiver
, on page 9, for more information).
!
8
