ScreenBeam Wireless Display Kit
My laptop computer does not have a CD-ROM drive. How can I
install the ScreenBeam Wireless Display software?
If your computer doesn’t have a CD-ROM drive, go to the following link:
http://www.actiontec.com/products/sbupdate.php. You will need
information from the sticker on the bottom of the ScreenBeam Pro
Receiver. Once you have entered the information, download the so
ft
ware
as indicated on the web page.
The ScreenBeam Wireless Display software can’t launch– it says it
can’t
fi
nd a USB Transmitter. How can I solve this?
First, if the display so
ft
ware doesn’t launch, wait about a minute before
trying anything else.
Th
en, unplug and plug the USB Transmitter dongle
back in, and try launching the display so
ft
ware again. If that doesn’t work,
open the Windows Device Manager and make sure the ScreenBeam
Transmitter is NOT disabled (locate it under “Network”).
Should I be concerned if Windows’
fi
rewall or anti-virus software
warns that ScreenBeam is trying to open a port?
ScreenBeam requires Windows to temporarily open a port to stream
content to the TV. Click Allow when the message appears. Some anti-
virus so
ft
ware settings can be more restrictive than others, and you may
not get a noti
fi
cation at all. If you are using anti-virus so
ft
ware and
ScreenBeam is not operating properly, you may need to temporary
disable the anti-virus so
ft
ware, and re-enable it a
ft
er using ScreenBeam. If
the problem persists, consult your anti-virus user guide to con
fi
gure the
proper settings for ScreenBeam.
I cannot detect the ScreenBeam Receiver from my laptop
computer using the ScreenBeam Wireless Display software. What’s
wrong?
First, make sure the ScreenBeam Transmitter is connected to the USB
port.
Th
en, select “Add a receiver” and try again.
39
