63
2. Click the
Yes
button next to
“
Reset Settings to Factory
”
.
3. Click
OK
on the pop-up message box to confirm.
4. The receiver reboots, and the receiver is reset to factory defaults after the reboot.
Note
: You can also reset your receiver to default by pressing the "
Reset
" button. Follow the
procedure below to restore the Receiver's default factory settings:
1. Power on the Receiver, and wait until the "
Ready to connect
" screen appears.
2. Hold down the Receiver's "
Reset
" button with a pin.
3. When the "
Reset to Default
" screen appears on the HDTV, release the "
Reset
" button.
The Receiver reboots, and it will be running with its default settings.
5.4. Upgrading the Receiver
ScreenBeam Pro supports firmware upgrade. And Actiontec
’
s ScreenBeam team will
constantly improve the receiver
’
s performance with new firmware.
Follow the procedure below to upgrade your receiver:
1. Log into ScreenBeam Pro
’
s web server, and go to the
Features
tab page by clicking the
Features
tab.
2. Set the
USB Local Access
feature to
Only allow firmware update
, or
Enable
.
