45
Ÿ
Allow source device to override overscan value
: When this option is enabled
(checked), the overscan value is in consistence with the setting on the source
device. Otherwise, the overscan value is in consistence with the setting on the
receiver.
3. Click the
Apply
button, and then click
OK
on the pop-up message box to confirm.
5.3.16.
Setting up Output Aspect Ratio
If the output does not fit your display screen due to wrong aspect ratio, you can try selecting
a proper aspect ratio for your display screen.
Follow the procedure below to adjust the aspect ratio for your TV screen:
1. Go to the
Features
tab page by clicking the
Features
tab.
2. Go to the
Aspect Ratio
line, and select a proper option in the
Aspect Ratio
drop-down
box.
In case of selecting the
4:3
option, you can also fine tune the horizontal and vertical offsets.
3. Click the
Apply
button, and then click
OK
on the pop-up message box to confirm.
