57
4. The receiver reboots, and the new SSID takes effect after the reboot.
5.3.28.
Setting up Broadcast Network Name
Follow the procedure below to set up the receiver
’
s Broadcast Network Name:
1. Go to the
Network Settings
tab page by clicking the
Network Settings
tab.
2. To enable/disable the
Broadcast Network Name
feature, go to the
Wireless Interface
Settings
section, and set the
Broadcast Network Name
feature to
Enable
/
Disable
.
Note
: By default, the
Broadcast Network Name
is disabled. The receiver
’
s SSID is not
broadcasted when the
Broadcast Network Name
function is disabled. In this situation you
can connect to the SSID manually. Refer to Section 5.1.2.1.
When SSID Broadcast is
Disabled
for detail.
3. Click the
Apply
button, and then click
OK
on the pop-up message box to confirm.
4. The receiver reboots, and the new setting takes effect after the reboot.
5.3.29.
Setting up Wireless Connection Properties
The receiver can wirelessly connect to your network through the ScreenBeam CMS WLAN
Adapter. We need to set up the wireless connection parameters before starting the
connection.
Follow the procedure below to set up the receiver
’
s wireless connection properties:
1. Go to the
Remote Management
tab page by clicking the
Remote Management
tab.
