AFTER SALES SUPPORT
1800 465 070
8
MODEL: S002145
8
54
33
33
36
41
55
39
Assembly Instructions (cont)
4. Attach the Rail Bracket (41) located at the front of Rail (8) to the Frame (39)
using 1 x 1/2”x100mm Bolt (36), 2 x M13x22mm Washers (33) and 1 x 1/2”
Locknut (54) that you removed in step 2. Cover 1/2” Locknut (54) with Nut
Cap (55).
5. Move the Seat (28) to the front of the Rail (8). Raise the Rail (8) to the
vertical position and insert the Frame Pin (37) into the hole on the Rail
Bracket (41) so that it holds the Rail (8) in place.
6. Attach the Rear Stabiliser (3) to the Rail (8) using 2 x M8x20mm Bolts (14)
and 2 x M8x20mm Washers (16).
7. Cut the retaining tie off the cord. Wrap the end of the Cord (45) around the
Small Pulley (5) on the Rear Stabiliser (3). Make sure that the Cord (45) is
not twisted and attach the Clip (97) at the end of the Cord (45) to the hole in
the Rail Attachment Bracket (43).
8
28
37
41
Hole
3
14 16
8
43
45
97
Hole
3
5
45
3
