MODEL: S002145
AFTER SALES SUPPORT
1800 465 070
7
Assembly Instructions
Find a clean flat surface to unpack and assemble your rowing machine. Prior to beginning assembly, ensure that
you have all of the parts listed in the Assembly Parts List and Hardware Identification Chart.
If you’re missing any parts, please contact our Service Centre on 1800 465 070 or email
[email protected] to arrange for replacement parts to be sent to you.
1. Attach the Front Stabiliser (50) to the Frame (39) using
2 x M10x52mm Bolts (46) and 2 x M10x20mm Washers (47).
2. Remove the Frame Pin (37) from the Frame (39). Unwrap the Cord (45) from
the Frame (39).
Remove 1 x 1/2” Locknut (54), 2 x M13x22mm Washers (33) and 1 x
1/2”x100mm Bolt (36) from the Frame (39).
NOTE:
The parts that you removed will be used in later steps.
3. Remove the M6*12mm bolt (9), two pieces Carriage Bumpers (10), Frame
bushing (11) which are
pre-assembled on the rear end of the Rail (8). Then slide the Seat (28) onto
the rail and assemble the removed M6*12mm bolt (9), two pieces Carriage
Bumpers (10), Frame bushing (11) at the end of the rail.
50
39
47
46
45
54
33
33
36
37
39
