Action Trackchair EAGLE, Owner'S Manual

Page: 36 / 50

Page | 34
RESNA Test Information/results as outlined in WC-1 and WC-2
Many of the required RESNA tests mandate the use of a test dummy. The weight of the test dummy used was 250 lbs.
Summary of testing data For Hawk
Standing static stability forward – track rotation locked 23.2 degrees.
Seated static stability forward – track rotation locked 23.4 degrees.
Standing static stability rearward – track rotation locked and seat tilted full back 25.0 degrees.
Seated static stability rearward – track rotation locked and seat tilted full back 22.1 degrees.
Standing static stability anti-tip casters – track rotation locked 32.7 degrees.
Seated static stability anti-tip casters – track rotation locked 36.0 degrees.
Lateral standing static stability anti-tip casters in least stable configuration – track rotation locked 19.6 degrees.
Lateral seated static stability anti-tip casters in least stable configuration – track rotation locked 26.1 degree.
Maximum step/transition obstacle climbing height 3”.
Running brakes – forward-reverse command stopping distance on level surface 20.17”.
Continuous theoretical driving range 8.92 miles.
Maneuvering theoretical driving range 3.08 miles.
Maximum speed forward – horizontal surface 2.8 MPH.
Maximum speed forward on inclined plane (6 degrees) 2.45 MPH.
All Climatic testing (hot and cold operation and rain) – Pass.
Maximum obstacle height the chair can both climb and descend 3”.
Electrical systems – meets all testing requirements- Pass
Maximum thermal drive test results – total distance traveled 1200 ft.
Reason for stopping the test is that the chair drove for 60 minutes which fulfilled the testing requirement).
Non-powered mobility test – force required to start the loaded wheelchair moving in a straight line on
the horizontal without electrical power 27.3 lb.
Electromagnetic compatibility test- Pass.
The Action Trackstander has been tested to 20 volts per meter (V/m) in the range of 26 MHz to 1000 MHz which is the
generally acceptable and useful immunity level against EMI at this testing level there was no EMI phenomena
observed