Console
Auto On/Off
While the user starts to do exercise, the Display will
show the workout value automatically. Once stop
exercising over 4 minutes, the Display will turn off.
Auto Scan
After the monitor is powered on or pressed Mode key,
the LCD will display all functions values from Time -
Speed - Distance - Calorie - Odometer- RPM . Each
value will be held for 6 seconds.
_____________
Display Modes
SCAN:
Automatically scans TIME, SPEED, DISTANCE,
and CALORIES in sequence with a change every four
seconds. Press and release the button until “SCAN”
appears on the display.
Time:
Display the workout time from 00:00 to 99:59.
User also can press Mode key to display the workout
time value.
Speed:
Display the current training speed from 0.0 to
99.9 KPH or MPH. User also can press Mode key to display the Speed value.
Distance:
Display the trip distance from 0.0 to 999.9 Km or Mile. User also can press Mode key
to display the distance value.
Calories:
Display the calories consumption during training from 0.0 to 999.9. User also can
press mode key to display the calories consumption value.
______________
To Reset
Press Mode key for 3 seconds, all the function value will be reset to zero.
Note:
1. If the computer displays abnormally, please re-install the battery and try again.
2. Battery Spec: 1.5V UM-3 or AA (2PCS).
3. The batteries must be removed from the console before it is scrapped and that they are
disposed safely.
Call for service 1-800-465-070 www.actionsports.com.au
