www.acti.com
www.acti.com
User
’s Manual
79
When Email is enabled as a triggered action (in Trigger Actions windows) and configured
properly, the NVR sends an email notification to specified email address(es) when an alarm
occurs during the arming schedule. The email contains basic alarm information such as alarm
type, alarm time, camera ID, and camera name, etc.
Before using this function, make sure the NVR has a functional connection to an SMTP server
with which you have a valid email account. Depending on the intended recipients, a connection
to the Internet may be required.
Only certain NVR models support this function.
1.
Click
System
>
Network
>
Email.
2.
Configure the related parameters. If server authentication is required, you need to enter the
correct username and password. Click
Test
to send a test email.
NOTE:
Enter a valid SMTP server address and port number, and then select
Enable TLS
if
required.
Select
Attach Image
if you want snapshots to be sent via email. Make sure Email and
snapshot have been enabled in the
Trigger Actions
window.
Only certain NVR models support image attachment. You may click
Test
to check
whether the email can be sent successfully.
3.
Click
Apply
to save the settings.
