ACTi TCM-7011, Hardware User Manual

Page: 9 / 24

www.acti.com
TCM-7411 Hardware User’s Manual
9
Physical description
1) Ethernet Port
The IP device connects to the Ethernet via a standard RJ45 connector. Supporting NWAY, this IP
device can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet).
2) Power Input
Connect the power adaptor here if your power input is DC12V.
3) Digital Input / Output & Audio Terminal Connector
This IP Camera supports DI/O & Audio input / output via terminal block.
Used in applications like motion detection, event triggering, time lapse recording, alarm
notifications, etc., the I/O terminal connector provides an interface to respective devices. The
Terminal Block wiring diagram is as follows:
PIN NAME DESCRIPTION
1 12V DC Power Input
2 GND Ground Pin